Vol. 7 No. 6 (2026): November 2026
Open Access
Peer Reviewed

Proposed Preventive Maintenance of The Kaeser Bsd-75 Compressor Through The Integration of Reliability-Centered Maintenance (Rcm) and Root Cause Analysis (RCA)

Authors

Muhammad Ibrani Ridho Ardyansyah , Said Salim Dahda

DOI:

10.46729/ijstm.v7i6.1527

Published:

2026-11-17

Downloads

Abstract

The Kaeser BSD-75 air compressor serves as vital support equipment on a knock-down furniture production line, providing pressurized air for pneumatic tools. However, the current maintenance strategy is purely corrective, lacking a preventive schedule. This study aims to identify failure modes and their root causes, subsequently formulating a proposed preventive maintenance policy by integrating Reliability Centered Maintenance (RCM) and Root Cause Analysis (RCA). The research data encompasses nine breakdown incidents (January 15, 2022 – February 7, 2026) resulting in a total of 37 hours of downtime, supplemented by field observations and interviews with four maintenance personnel. The RCM analysis includes defining functions and functional failures, conducting a Failure Mode and Effects Analysis (FMEA) based on the Risk Priority Number (RPN), and selecting maintenance policies; system reliability is evaluated using Mean Time Between Failures (MTBF), Mean Time To Repair (MTTR), and availability. The RCA utilizes Pareto charts, the "5 Whys" technique, and fishbone diagrams. The results indicate that the coupling elastomer holds the highest priority (RPN 378; 31.7%), with the top three components accounting for 68.0% of the total RPN. The calculated metrics are an MTBF of 4,452 hours, an MTTR of 4.11 hours, and an availability of 99.91%. The root causes are systemic, stemming from the absence of procedures for alignment, vibration monitoring, lubrication and oil specification control, periodic hose inspections, and systematic breakdown documentation. The proposed interventions include scheduled maintenance for three components, condition-based maintenance for three components, and five corrective actions. As the RCA process involves analytical deduction beyond the documented causes, these findings require field verification.

Keywords:

Preventive Maintenance, Reliability Centered Maintenance, Root Cause Analysis, FMEA, screw compressor and MTBF.

References

[1] Achouch, M., Dimitrova, M., Ziane, K., Sattarpanah Karganroudi, S., Dhouib, R., Ibrahim, H., & Adda, M. (2022). On predictive maintenance in Industry 4.0: Overview, models, and challenges. Applied Sciences, 12(16), 8081. https://doi.org/10.3390/app12168081

[2] Ali, A., & Abdelhadi, A. (2022). Condition-based monitoring and maintenance: State of the art review. Applied Sciences, 12(2), 688. https://doi.org/10.3390/app12020688

[3] Almuhari, H. J., & Jazuli, J. (2025). Integrasi metode RCA dan TRIZ dalam menyelesaikan masalah produksi bata ringan (studi kasus di PT. X). Jurnal Teknik Industri Terintegrasi (JUTIN), 8(3), 2529–2542. https://doi.org/10.31004/jutin.v8i3.46253

[4] Ari, M., Juniani, A. I., Setiawan, T. A., Karuniawan, B. W., Faruq, H. N., Lendie, A. K., & Rizqullah, F. R. (2025). Integration of FMEA, LTA, and fishbone diagrams in the application of RCM II on KN–02 gas compressors. International Journal of Marine Engineering Innovation and Research, 10(4), 1146–1155.

[5] Cahyani, O. D., & Iftadi, I. (2021). Scheduling preventive maintenance with the reliability centered maintenance method at the Cabinet PU station at PT IJK. Teknoin, 27(1), 25–34. https://doi.org/10.20885/teknoin.vol27.iss1.art4

[6] Dahlia, A., & Profita, A. (2024). Penerapan metode FMEA (failure mode and effect analysis) untuk menganalisis risiko kecacatan pada produk plywood. Jurnal Teknik Industri (JATRI), 2(1), 71–83. https://doi.org/10.30872/jatri.v2i1.1235

[7] Firmansyah, M., & Rizqi, A. W. (2022). Analisis perawatan mesin dengan metode reliability centered maintenance (RCM) terhadap mesin bag inserter (FLEXIM). G-Tech: Jurnal Teknologi Terapan, 6(2), 100–109.

[8] Kumar, A., Sathujoda, P., & Ranjan, V. (2021). Vibration characteristics of a rotor-bearing system caused due to coupling misalignment – a review. Vibroengineering Procedia, 39. https://doi.org/10.21595/vp.2021.22195

[9] Mujiarto, I., Asmoro, E. I., & Kundori, K. (2022). Pengukuran laju kerusakan dengan mengindikasikan nilai MTBF dalam manajemen perawatan mesin pada PT. AIC. Jurnal Teknik Mesin, Industri, Elektro dan Informatika, 1(3), 14–23. https://doi.org/10.55606/jtmei.v1i3.491

[10] Najah, R. I., Nursanti, E., & Kiswandono. (2023). Analisis komponen kritis hoist crane menggunakan metode reliability centered maintenance (RCM) di PT Inka (Persero). Jurnal Valtech, 6(2), 258–263.

[11] Omozuhiomwen, G. E., Ebenuwa, S. H., Kure, H. I., Ijemaru, G. K., Obi, E. R., & Nwajana, A. O. (2025). Reliability-centered maintenance using reliability parameters on gas compressors. International Journal of Manufacturing, Materials, and Mechanical Engineering, 14(1), 1–31. https://doi.org/10.4018/IJMMME.367256

[12] Paoprasert, N., Lin, W. Y. H., & Muneekaew, T. (2022). Assessing risk priority numbers of failures in the screw tightening machine of a hard disk drive production system. Journal of Machine Engineering, 22(1), 124–137.

[13] Puspita Sari, T., Lamatinulu, & Dahlan, M. (2025). Analisis perencanaan perawatan komponen excavator CAT PC300 untuk mengurangi downtime dengan metode RCM di PT. SYH. Jurnal Aplikasi dan Pengembangan Sistem Industri (JAPSI), 3(4), 185–192. https://doi.org/10.3926/japsi.v3i4.2254

[14] Rifai, A., Suwarno, A., & Romli, I. (2025). Perencanaan pemeliharaan pressure reducing system dengan metode reliability centered maintenance. Jurnal Teknologi dan Manajemen Industri Terapan, 4(3), 881–887. https://doi.org/10.55826/jtmit.v4i3.1066

[15] Siagian, I. I., Ginting, P. J., & Sembiring, A. C. (2024). Analisis perawatan mesin kritis dengan metode reliability centered maintenance (RCM) pada pabrik kelapa sawit. Jurnal Ilmiah Teknik Industri Prima (JURITI PRIMA), 7(2). https://doi.org/10.34012/juritiprima.v7i2.5554

[16] Simanungkalit, R. M., Suliawati, S., & Hernawati, T. (2023). Analisis penerapan sistem perawatan dengan menggunakan metode reliability centered maintenance (RCM) pada cement mill type tube mill di PT Cemindo Gemilang Medan. Blend Sains Jurnal Teknik, 2(1), 72–83. https://doi.org/10.56211/blendsains.v2i1.199

[17] Susilo, D. D., & Widjajati, E. P. (2024). Proposed preventive maintenance of air screw compressor machine using failure mode and effect analysis and modularity design. IJIEM (Indonesian Journal of Industrial Engineering & Management), 5(3), 770–777. https://doi.org/10.22441/ijiem.v5i3.23742

[18] Wibowo, T. J., Hidayatullah, T. S., & Nalhadi, A. (2021). Analisa perawatan pada mesin bubut dengan pendekatan reliability centered maintenance (RCM). Jurnal Rekayasa Industri (JRI), 3(2), 110–120. https://doi.org/10.37631/jri.v3i2.485

[19] Yanuarsah, R., Widyaningrum, D., & Jufriyanto, M. (2023). An analysis of unscheduled shutdown toward rotary equipment blower engine 18C3101-2 by root cause analysis (RCA) method (case study in PT. Petrokimia Gresik). SITEKIN: Jurnal Sains, Teknologi dan Industri, 20(2), 881–890.

[20] Yudistia, F., Suherman, S., Hamdy, M. I., Harpito, H., & Devani, V. (2026). Proposed maintenance planning for screw press machines using the reliability centered maintenance (RCM) method at PT. SIR. IJIEM (Indonesian Journal of Industrial Engineering & Management), 7(1), 44–54. https://doi.org/10.22441/ijiem.v7i1.32415

[21] Zuniawan, A. (2020). A systematic literature review of failure mode and effect analysis (FMEA) implementation in industries. IJIEM (Indonesian Journal of Industrial Engineering & Management), 1(2), 59–68.

Author Biographies

Muhammad Ibrani Ridho Ardyansyah, Industrial Engineering Study Program, Faculty of Engineering, University of Muhammadiyah Gresik, Indonesia

Author Origin : Indonesia

Said Salim Dahda, Industrial Engineering Study Program, Faculty of Engineering, University of Muhammadiyah Gresik, Indonesia

Author Origin : Indonesia

Downloads

Download data is not yet available.

How to Cite

Ibrani Ridho Ardyansyah, M., & Said Salim Dahda. (2026). Proposed Preventive Maintenance of The Kaeser Bsd-75 Compressor Through The Integration of Reliability-Centered Maintenance (Rcm) and Root Cause Analysis (RCA). International Journal of Science, Technology & Management, 7(6), 794–806. https://doi.org/10.46729/ijstm.v7i6.1527